Silage Additive Applicators

Applicators for trailed forage harvesters

Low Volume Liquid applicators

With lower pick-up rates our low volume applicators are suitable for trailed forage harvesters that are applying additive at rates of 1 to 3 litres per tonne.

For this we have: -

The low volume Dflow module can accurately deliver up to 5 litres per minute. With our servoing digitally controller this can be used with your own tank.

Our low Volume SDP kit comes with a non servoing in cab speed controller and delivers up to 5 litres per minute. Again the kit is suitable for use with your own tank

The low volume Flowmaster stem pump is a very popular choice to be used with a 200 litre upright tank. It is robustly made easy to set up and use. Supplied with a non servoing in cab speed controller delivering up to 4 litres per minute.

Ultra Low Volume Liquid applicators

Ultra Low applicators more commonly associated with self propelled forage harvester are also able to be used with trailed machines. Application rates from 20ml per tonne can be applied with our ULV applicator. It has open flow pipe work with NO in line flow sensor or filters. The 55 litre translucent tank will treat over 1000 tonnes of forage before refill with an application rate of 50 ml per tonne.

Powder/granular applicator

With our new Dflow Powder Master powder/granular additive can be dispensed more precisely than ever before. supplied with our servoing digital control box that can be easily be set up to use with all brands of silage or forage additive. With more control at lower dispensing rates this would be the best choice for applying dry additive

Our non servoing Powder Master with in cab speed controller is ok for higher dispensing rates.

Select the applicator for you

Additive applicator pump module - No tank

Pump Module

55 litre ultra low volume additive applicator

ULV

Stem/barrel pump applicator kit

Flowmaster

Powder or granular additive applicator

Powdermaster

Diaphragm applicator kit with flowmeter

SDP