Thru beam crop detector for balers and forage wagons
Thru beam crop detector for balers and forage wagons
Thru beam crop detector for balers and forage wagons
Thru beam crop detector for balers and forage wagons
Thru beam crop detector for balers and forage wagons
Thru beam crop detector for balers and forage wagons
Selmech Supplies Thru Beam Crop Detector Kit is designed to be used in conjunction with the Selmech Supplies in cab Dflow or PWM controller. This is particularly useful on bales and forage wagon. When positioned each side of the pickup it will automatically turn the applicator on when the beam is broken as crop is being picked up. When the beam is not broken the application will be turned off and the controller will indicate that there is NO CROP.
Mounting and mounting position of the sensors will vary depending on make and model of the baler. A pair of brackets are supplied but in some cases an adaptor bracket may need to be fabricated by the end user.
An output for the addition of a thru beam crop detector can be added to theDflow+ controller.
An output for the addition of a thru beam crop detector can be added to the PWM controller.
One 5m/16ft cable from controller to split connector plus two 5m/16ft cables from there to the sensors
A pair of brackets are supplied but in some cases an adaptor bracket may need to be fabricated.
Automatically turn the applicator on and off as crop is being picked up.
Always refer to the user manual to make sure you have the applicator set up correctly. There is a fault finding table in the manual which may help you solve the problem. There are also some links below to further help you.